• CPU: Microchip SAMA5D27 MPU (Cortex A5 single core @500MHz)
    • On-the-fly AES encryption/decryption on DDR and QSPI memories
    • 32-Kbyte L1 data cache, 32-Kbyte L1 instruction cache
    • 128-Kbyte L2 cache configurable to be used as an internal 32 bit single cycle SRAM
    • 5 Kbytes of internal scrambled SRAM:
      • 1 Kbyte non-erasable on tamper detection
      • 4 Kbytes erasable on tamper detection
    • 256 bits of scrambled and erasable registers
    • Up to seven tamper pins for static or dynamic intrusion detections
    • Secure Boot Loader
    • RTC including time-stamping on security intrusions
    • Programmable fuse box with 544 fuse bits including JTAG protection and BMS
    • NAND controller
    • ARM NEON ™ SIMD Media Processing Engine
    • Hardware Floating Point Unit
    • Hardware cryptography
      • SHA: SHA1, SHA224, SHA256, SHA384, SHA512; compliant with FIPS PUB180-2
      • AES: 256, 192, 128 bit key algorithm; compliant with FIPS PUB 197
      • TDES: two-key or three-key algorithms; compliant with FIPS PUB 46-3
      • True Random Number Generator (TRNG); compliant with NIST Special Publication 800-22 Test Suite and FIPS PUBs 140-2 and 140-3
  • RAM: 256 MByte of DDR3L RAM @ 166MHz
  • FLASH: Up to 128 MByte of QSPI flash memory @ 133MHz
  • Extended temperature range: -40°C; to +85°C
  • Ultra Low-power mode with fast wakeup capability
  • Low-power Backup mode with 5-Kbyte SRAM and SleepWalking ™ features
  • Wakeup from up to eight wakeup pins, UART reception, analog comparison
  • Extended Backup mode with DDR in Self-Refresh mode
  • Low power consumption:
    • 100% CPU (memtester): 143mA @ 3.3V (472mW)
    • idle (at Linux prompt): 84mA @ 3.3V (277mW)
    • Ultra LowPower 1 (ULP1) (resume in 159ms): 5.3mA @ 3.3V (17mW)
  • Low EMI (multiple ground planes and impedance controlled tracks)
  • RoHS compliant

Archiemde BASE is the main board and is full of general peripherals:

1x Lan 10/100Mb

2x USB 2.0

2x i2C bus

2x 1-Wire bus

1x SPI bus

5x Digital Optoisolated I/O 5V

1x Anemometer input

***Control all devices supply ON/OFF individually***

***Low power consumption. Various sleep modes***

Go to Shop

Archimede BASE L01 is full of general peripherals and have on board RP-SMA Conncetor and PyCom L01 module for:

Bluetooth Low Energy

WiFi b/g/n/e

LoRa Gateway

Go to Shop

Archimede PROFESSIONALE is an expansion module that is connected to Archiemede BASE and increases the peripherals:

-1x LAN 10/100Mb

-2x USB 2.0

-2x HALF pcie socket  (One with SIM slot)

-2x TIA/EIA (RS232/RS485 Half and Full/RS485)

-4x Analog IN (V or mA)

-2x RTD ( PT100/PT1000 – 2/3/4 wire)

-1x THP Bosch BME 280 (on board)

***every peripheral supply can be disabled individually***

Go to Shop